22x24 Fishing Premade UV DTF

Pre-Made UV DTF Gang Sheet Transfers Only
(Blanks Not Included)

Application Instructions:

1. Clean Surface: Ensure your blank is clean, dry, and free of dust or oils.

2. Peel & Place: Carefully peel the white backing off the transfer. Place the clear film (sticky side down) onto your blank.

3. Press Firmly: Use a squeegee, scraper, or your fingers to firmly rub over the entire design, making sure it adheres well.

4. Peel Film: Slowly and carefully peel the clear film away, leaving the design on your blank.

No heat press is required – UV DTF transfers are pressure-activated and work on hard, smooth surfaces like glass, plastic, metal, and more.

Important Notes:

• Not for use on fabrics – these are for hard surfaces only.

• Do not use heat – UV DTF is a cold application.

• Ensure proper adhesion by applying even pressure across the full design.

• Avoid washing or handling your item roughly for 24 hours after application.

ALL SALES ARE FINAL
We are not responsible for application issues.